RS 082 Air Pump (Double Outlet)

Description

Description:

RS-082 air motor is very easy to install and operate. First, the aquarium above, must be placed in a dry place. If the aquarium has a cover, it can be placed on the aquarium. Particular attention should be paid to the above. Otherwise, the pump may malfunction when water will return to the pump. After the pump is placed in a suitable place, the pump is ready for use by attaching the hose that you will provide suitable for the air motor to the end of the air outlet pipes.

Warnings:

• If the pump is placed in a lower position from the aquarium, the pump may be broken due to back flow. If it is required to work below, a Check Valve must be installed between the air outlet and the air stone.
• Care should be taken to ensure that the pump is in a dry place above the aquarium. It should not be dropped into the aquarium. If it falls, removing it from the water without unplugging; It may cause electric shock.
• If the pump falls into water, it should dry for a few days after removing the plug by pulling it out. After making sure that it is dry, it should be restarted.
• The pump must remain in continuous working condition. It can also work during cleaning as long as the hose is disconnected and care is taken to prevent water from coming out. Cleaning is recommended only if the plug has been pulled.
• It should definitely not be oiled.
• Hose control should be done once a week. For this purpose, some air should be blown from the end of the hose and it should be checked whether there is any clogging. If there is a blockage, the blockages should be removed by using a special hose brush.